YogiSource.com my account | view cart | customer service
 Search:    
Welcome to the new Yoga.com Forums home!
For future visits, link to "http://www.YogiSource.com/forums".
Make a new bookmark.
Tell your friends so they can find us and you!

Coming soon ... exciting new changes for our website, now at YogiSource.com.

Search | Statistics | User Listing View All Forums
You are logged in as a guest. ( logon | register )



Extensive use of blast furnace slag
Moderators: Moderators

Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Yoga -> General YogaMessage format
 
fengqingxue
Posted 2018-02-13 3:19 AM (#241113)
Subject: Extensive use of blast furnace slag


Expert Yogi

Posts: 5901
5000500100100100100
Blast furnace slag is kind of molten silicate substances discharged from the blast furnace smelting pig iron; blast furnace smelting, from the top into the iron ore, fuel (Jiao Tan) and the flux, when the furnace temperature reaches 1400~1500 DEG C, the material to be melted into liquid in the liquid phase, floats at the mouth through the iron slag, the main iron ditch skimmer separation or slag discharge, which is blast furnace slag. Blast furnace slag is composed of gangue, ash, and other impurities can not enter the flux in pig iron which is a eutectic mixture.
There are three ways of dealing with the high temperature slag of blast furnace slag: natural cooling into hard dry slag by water quenching; high temperature liquid slag crushed into slag loose; with steam or compressed air to heat the liquid slag down, turned into a fluffy slag.Integrated optical hard film waterproof nano coating machine for mobile phone case
The blast furnace slag is a good method for comprehensive utilization, and 100% of the advanced blast furnace slag has been used. At present, punching equipment of water slag can ensure the quality of water glass slag, the degree can reach 90% ~ 95%, the average particle size of slag is 0.2 ~ 3.0mm, slag water is less than or equal to 15%.Cobalt Base High Elastic Alloy Vacuum Water Quenching F
The main uses of the blast furnace slag are as follows: (1) the production of slag cement. Water slag has potential water and cementitious properties, and it can show the hard cementitious property of water under the action of cement clinker, lime and gypsum and so on, so it is a good raw material for cement. Water slag can not only be used as cement mixture, but also can be made into non clinker cement. (1) slag Portland cement is made by mixing Portland cement clinker and water slag 3% to 5% of gypsum, mixing or grinding, and then mixing evenly. Slag Portland cement is referred to as slag cement for short.
Dental Zirconia Fast Sintering Microwave Furnace Lab Microwave Furnace

Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread


(Delete all cookies set by this site)