Expert Yogi
Posts: 7714
   
| Centrifugal vacuum pump is a multi system centrifugal structure. The suction gas produces centrifugal force under the action of the high-speed rotating impeller, and the step-by-step pressurization is discharged to the outlet of the impeller outside the pump to deal with the center of the quasi-middle passage. Larger deviation will affect the pump volume. Attention must be paid to assembly and overhaul. If there is a large deviation, it must be adjusted.air-cooled roots-liquid ring vacuum system
The main parts of centrifugal vacuum pump are: air inlet section, air inlet plate, middle section baffle, last stage baffle, impeller, shaft, bearing rack, oil seal box, etc. The pump is driven by a motor. The main parts of the pump studio are HT200 cast iron, the impeller is riveted structure, the wheel core is HT200 cast iron, the blade and the front and rear cover plates are made of LY8 hard aluminum, the shaft is made of high quality carbon steel, after quenching and tempering treatment, both ends of the shaft are sealed by PTFE graphite, the bearing is made of low noise single row ball bearing with lithium base lubrication. Grease lubrication.oil free vacuum pump
Centrifugal vacuum pump is a single-suction multi-stage centrifugal vacuum pump, used to pump or transport air and physical, chemical properties similar to dry air gas medium. It is suitable for steam extraction such as clothing, metallurgy, paper making, cement, textile, chemical industry, light industry, etc.
limit pressure of the vacuum pump |
Centrifugal vacuum pump
