YogiSource.com my account | view cart | customer service
 Search:    
Welcome to the new Yoga.com Forums home!
For future visits, link to "http://www.YogiSource.com/forums".
Make a new bookmark.
Tell your friends so they can find us and you!

Coming soon ... exciting new changes for our website, now at YogiSource.com.

Search | Statistics | User Listing View All Forums
You are logged in as a guest. ( logon | register )



Concrete pump
Moderators: Moderators

Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Meditation -> General MeditationMessage format
 
hhm1020
Posted 2018-11-09 12:38 AM (#246796)
Subject: Concrete pump


Expert Yogi

Posts: 7814
50002000500100100100
The structure of concrete distributor pump truck is shown. It is mainly composed of chassis of special truck, concrete pump, mixer, screen separator, distributor, concrete distributor valve and leg.

Concrete distributing valve

Concrete distribution valve is the key part of concrete pump truck. It should meet the requirements of smooth pumping, fast switching, effective sealing, preventing concrete overflow, and low suction resistance.

Commonly used concrete distribution valve has gate valve, tube valve and rotary valve three kinds.

The working principle of gate valve is shown in Figure 2. There is one gate at the hopper outlet and one at the pump outlet. The position of the two gates is controlled by two hydraulic cylinders with hydraulic interlocking. In the figure, the concrete cylinder 1 is in the discharge state, the gate 2 is in the left position, and the inlet and outlet 3 of cylinder 1 is blocked, while the inlet and outlet 8 of cylinder 9 opens the suction material. The gate 7 is in the right position, and the discharge port of the cylinder 1 opens the feed, and the discharge port of the cylinder 9 is closed. When the discharge of cylinder 1 is completed, the two hydraulic cylinders are simultaneously operated by electro-hydraulic control. The gate 2 moves to the right, the gate 7 moves to the left, the cylinder 1 starts to suck, and the cylinder 9 starts to discharge, thus completing a work cycle.

The instantaneous separation part is sealed by pumping pressure and suction pressure. When the wear of the spool valve is gradually aggravating, this pressure also acts as an automatic adjusting valve plate. Gate valves are applicable to various formulations of concrete.

The pipe valve is not only the concrete distributing valve, but also the component of the concrete conveying pipe. Its form mainly has S shape distribution valve and skirt valve.

The skirt valve is shown in Figure 3, which is installed in the hopper. Because its structure looks like a gorgeous skirt, it is named after it. It is precisely because of this shape that when the gate valve swings back and forth, it joins the concrete cylinder 1 and the concrete cylinder 4 in turn and presses the concrete. It can achieve instantaneous balance and automatically adjust the position within the entire wear range. Because the concrete is squeezed when the skirt valve swings, it will react to the skirt valve to synthesize an axial extrusion force, thus achieving a reliable seal. In addition to pumping concrete, this gate valve can also transport other dilute fluids.
mailbox:contact@evpvacuum.com

Website source:www.evpvacuum.com
Related Products:


Molecular Pump In Vacuum Coating
Turbo Molecular Pump Working Principle
Liquid Ring Vacuum Pump Installation
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread


(Delete all cookies set by this site)