YogiSource.com my account | view cart | customer service
 Search:    
Welcome to the new Yoga.com Forums home!
For future visits, link to "http://www.YogiSource.com/forums".
Make a new bookmark.
Tell your friends so they can find us and you!

Coming soon ... exciting new changes for our website, now at YogiSource.com.

Search | Statistics | User Listing View All Forums
You are logged in as a guest. ( logon | register )



Effect of alloying elements on phase diagram of iron carbon alloy
Moderators: Moderators

Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Yoga -> General YogaMessage format
 
fengqingxue
Posted 2021-08-17 2:26 AM (#258159)
Subject: Effect of alloying elements on phase diagram of iron carbon alloy


Expert Yogi

Posts: 7714
50002000500100100
1. Effects of alloying elements on phase a region: 1) expand phase a region (Mn, Ni, CO); 2) Reduce the phase a region (Cr, V, Mo, SI); 3) It is for this reason that we can produce austenitic steel and ferritic steel;
2. Effect of alloying elements on S and e points: all elements that expand the A-phase region move s and e points to the left and lower; All elements that reduce the phase a region move the s and e points to the upper left.
Influence of alloy elements on S and e points: as shown in the figure influence of alloy elements on S and e points:
1. Effect on austenitizing - most alloying elements (except nickel and cobalt) slow down the austenitizing process. Therefore, higher heating temperature and longer holding time are required during heat treatment than carbon steel—— Carbide should not decompose.Electro galvanized steel wire 28 gauge
2. Effect on austenite grain size - most alloying elements hinder austenite grain growth. On the contrary, manganese and boron can promote austenite grain growth. Therefore, except manganese steel, alloy steel is not easy to overheat when heated. This is beneficial to obtain fine martensite after quenching; It is also conducive to appropriately increase the heating temperature, make more alloy elements dissolve in austenite, increase hardenability and improve the mechanical properties of steel.construction companies aisi 316 2b stainless steel plate
3. Effect of alloying elements on Austenite Transformation -- except cobalt, all alloying elements move the C curve to the right, reduce the critical cooling rate of steel and improve the hardenability of steel. Some alloying elements also change the shape of C curve. In addition, most alloying elements also reduce the MS point.Steel Wire Coil









Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread


(Delete all cookies set by this site)