YogiSource.com my account | view cart | customer service
 Search:    
Welcome to the new Yoga.com Forums home!
For future visits, link to "http://www.YogiSource.com/forums".
Make a new bookmark.
Tell your friends so they can find us and you!

Coming soon ... exciting new changes for our website, now at YogiSource.com.

Search | Statistics | User Listing View All Forums
You are logged in as a guest. ( logon | register )



Basic characteristics of Q235 steel
Moderators: Moderators

Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Yoga -> General YogaMessage format
 
fengqingxue
Posted 2021-08-25 3:18 AM (#258166)
Subject: Basic characteristics of Q235 steel


Expert Yogi

Posts: 7714
50002000500100100
In GB / T 700-2006, carbon structural steel Q235 is divided into four grades A, B, C and d according to metallurgical quality, and the chemical composition of each grade is
Q235: Grade A, B, C and D (GB / T 700-2006)Flexible corrugated steel conduit pipes factory direct sell steel pipes
Q235 class A contains C = 0.22%, Mn = 1.4%, Si = 0.35%, s = 0.050 and P = 0.045
Grade Q235B contains C = 0.20%, Mn = 1.4%, Si = 0.35%, s = 0.045 and P = 0.045 (with the consent of the demander, the carbon content can not be greater than 0.22%)
Q235C grade, C = 0.17%, Mn = 1.4%, Si = 0.35%, s = 0.040, P = 0.040
Grade q235d, containing C = 0.17%, Mn = 1.4%, Si = 0.35%, s = 0.035 and P = 0.035
There are many examples of manufacturing cold working dies by using low-carbon martensite rigid quenching process in China.304 316 stainless steel welded decorative tube
Using double glow plasma alloying technology, Mo CR co infiltration is carried out on the steel surface, followed by supersaturated carburizing, quenching and tempering. The thickness of Mo CR body layer is more than 100 microns, the surface Mo content can reach 20%, the Cr content can reach 10%, the carbon content of supersaturated Carburized surface can exceed 2.0%, the surface composition is close to molybdenum high-speed steel, and the surface hardness after quenching and tempering can reach 1300hv, More than general metallurgical high speed steel. The wear test shows that the friction coefficient increases with the increase of contact stress, and the average relative wear resistance is 2.2 times that of GCr15 carburized quenched steel.all size top quality low price carbon steel wire rope










Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread


(Delete all cookies set by this site)