Expert Yogi
Posts: 6088
  
| Wear resistant nickel base alloy is a kind of nickel alloy that not only bears abrasive wear, adhesive wear and other types of wear, but also bears medium corrosion and high-temperature oxidation. Therefore, the working conditions of nickel base are much more complex than those of general wear-resistant steel and wear-resistant cast iron.
Wear resistant nickel base alloy is a kind of nickel base alloy that not only bears abrasive wear, adhesive wear and other types of wear, but also bears medium corrosion and high-temperature oxidation.
Therefore, its working conditions are much more complex than ordinary wear-resistant steel and wear-resistant cast iron. The chemical composition of nickel base alloy is (%): c0.10 ~ 0.20, Mn 0.25, si0.60, cr14.00 ~ 17.00, mo1.50 ~ 6.00, al2.5 ~ -3.50, fe8.00 ~ 12.00, ti1.50 ~ 2.50 and Ni allowance. The tensile strength at 820 ? is 520mpa and the elongation is 3%.
In addition to abrasive wear, adhesive wear and other types of wear, nickel alloys also undergo medium corrosion and high-temperature oxidation. Therefore, the working conditions of nickel base are much more complex than those of general wear-resistant steel and wear-resistant cast iron.1.6MM mig hilo de soldadura de acero inoxidable 309 309L
The chemical composition of wear-resistant nickel base alloy is (%): si0.60, cr14.00 ~ 17.00, mo4.50 ~ 6.00, Al 2.5 ~ 3.50, fe8.00 ~ 12.00, Ti 1.50 ~ 2.50 and Ni allowance. The tensile strength at 820 ? is 520mpa and the elongation is 3%.Acero PIPE CULVERT CORRUGATED 18
This material is generally used as wear-resistant parts working in air or low lubricating liquid, such as valves, pumps, pistons, piston rings, seals, brakes, tappets, blades and blades in petrochemical equipment, atomic energy equipment, jet aircraft and internal combustion engines.Fabricantes de chapa de acero
|
Wear resistant nickel base alloy
