Viewing a thread - Commissioning and acceptance of vacuum furnace



	Search:



Site Areas	store	\|	articles	\|	forums	\|	studios	\|	vacations

	yoga \| massage \| fitness \| wellness \| meditation

Welcome to the new Yoga.com Forums home!
For future visits, link to "http://www.YogiSource.com/forums".
Make a new bookmark.
Tell your friends so they can find us and you!

Coming soon ... exciting new changes for our website, now at YogiSource.com.

Search | Statistics | User Listing

View All Forums

You are logged in as a guest. ( logon | register )

Commissioning and acceptance of vacuum furnace Moderators: Moderators Jump to page : 1 Now viewing page 1 [25 messages per page]	View previous thread :: View next thread
Yoga -> General Yoga	Message format

hhm1020

Posted 2022-01-10 12:24 AM (#258236)
Subject: Commissioning and acceptance of vacuum furnace

Expert Yogi

Posts: 8285
5000

VACUUM FURNACE
Mechanical, pneumatic, and electrical linkage debugging, adjust the workpiece transfer time = 25S, the entire linkage should be coordinated, stable, accurate and reliable for three consecutive actions under the condition of loading 200Kg.
Mosi2 Heating Element Heat Treatment Furnace
Debugging of air-cooled fan, the speed is about 1400r/min, the rotation is flexible, and there is no abnormal phenomenon.The debugging of the alarm system should be accurate, safe and reliable.Measure insulation resistance greater than or equal to 20 kilohms.Measure the cold vacuum degree of the furnace, and the pressure rise rate is close to 0.5Pa/h (can be combined with the thermal debugging).
Sic Thermocouple Protection Tube Sintering

Jump to page : 1
Now viewing page 1 [25 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)