YogiSource.com my account | view cart | customer service
 Search:    
Welcome to the new Yoga.com Forums home!
For future visits, link to "http://www.YogiSource.com/forums".
Make a new bookmark.
Tell your friends so they can find us and you!

Coming soon ... exciting new changes for our website, now at YogiSource.com.

Search | Statistics | User Listing View All Forums
You are logged in as a guest. ( logon | register )



Introduction to mixed flow pump
Moderators: Moderators

Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Yoga -> General YogaMessage format
 
hhm1020
Posted 2022-12-01 4:17 AM (#258437)
Subject: Introduction to mixed flow pump


Expert Yogi

Posts: 8285
500020001000100100252525
1? Type of mud flow pump

Mixed flow pump is a kind of pump between centrifugal pump and axial flow pump. Its lift is suitable

Medium. With large flow and wide application scope, it is a good pump type in plain river network areas and hilly areas.

According to the difference of outlet chamber of gear pump, diaphragm pump has volute type and guide vane type.

The volute type mixed flow pump can be divided into horizontal type and vertical type, among which the horizontal type is more widely used; Guide vane mixing

There are also two types of sulfur pumps: horizontal and vertical. The vertical mixed flow pump is similar to the vertical axial flow pump

Medium and small mixed flow pumps, most of which are of chip expansion volute type, and large mixed flow pumps are of guide vane type.

Like axial flow pump, the pr plate of mixed flow pump is generally fixed, but large guide vane mixed flow pump

The blade pairs of are made into fully adjustable ones. According to the needs of operation, the blade can be adjusted at any time

Installation angle to expand its high efficiency operation range.

2? Structure of mixed flow pump

Compared with centrifugal pump and axial flow pump, mixed flow pump has low lift and large flow, so the impeller

The shape is quite special. Since the difference between the inlet diameter and the outlet diameter of the impeller is small, the flow passage

The ratio of width to outlet diameter is relatively large, so the relative width of volute is greater than that of centrifugal pump

Large. The blade is in a throw curve form from the inlet to the outlet, and the edge of the blade outlet is inclined, resulting in

Centrifugal force and thrust, the direction of water flowing out of the impeller is neither radial (such as centrifugal force

Pump) is not axial (such as uranium flow pump), but is inclined between them, so mixed flow pump

Also called diagonal flow pump. The shape of the mixed flow system impeller is shown in Figure 5. Low specific speed impeller

It is closed, with front and rear cover plates, similar to the impeller of centrifugal pump; High specific speed. L round is open

Type, similar to axial flow pump.
vacuum pump oil change for precautions
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread


(Delete all cookies set by this site)