Expert Yogi
Posts: 8285
    
| Clear water pump is used for conveying clean water and other liquids with physical and chemical properties similar to clean water. It is suitable for industrial and urban water supply and drainage, pressurized water supply in high-rise buildings, garden sprinkler irrigation, fire pressurization, long-distance transportation, HVAC refrigeration cycle, farmland irrigation, bathroom and other cold and warm water circulation pressurization and equipment matching.
Characteristics of clean water pump:
Relatively good performance, with powerful motor device and reasonable body design, high efficiency and low noise. The location of the waterway is treated uniquely, which not only prevents corrosion and rust, but also has good wear resistance.
It has economic, practical, energy-saving design, and reasonable price.
Easy to set up and install, easy to use, with the use of new process design, promoting simple installation and convenient maintenance. It has a self priming function.
Common types of clean water pumps:
Self priming clean water pump: With good water resource quality and relatively fixed operating position, the suction head is within 3.5 meters, and the pipeline is stable. When used for daily water supply in wells and irrigation in plantations, it can reduce the inconvenience of water injection during pumping. The actual pump head is within 22 meters, and the working efficiency of chemical pumps is slightly weaker. When putting into operation for the first time, it is necessary to first inject circulating and emptying water before the water pump can start self priming.
Water injection type clean water pump: Water resources and water bodies have good mobility, and the pipeline is relatively not fixed. The actual pump lift within 2.5 meters is within 32 meters, and the pump flow can be adjusted according to demand. It is suitable for fruit planting professionals to spray pesticides and water supply, with high work efficiency. The suction pipe should ensure good sealing.
Submersible clean water pump: With abundant water resources, the pump has a low head and valves are more suitable for irrigation in fields and plantations that require a large amount of water. Due to the fact that the entire equipment of the submersible pump is placed in the water inlet and the axial water pushing increases, reducing the water flow rate will increase the pump load. Therefore, it is not necessary to install a valve in the drainage pipe of the submersible pump to avoid burning the motor due to excessive resistance when starting the pump due to valve shutdown.
Perflurane FFKM Rubber Seals |
Characteristics and classification of clean water pumps
